CN
Hotline
400-101-4540

Product Center

Location: Home - Product Center - Us two-stage compression series - Two stage compression (air cooling) permanent magnet series - Two stage compression permanent magnet screw compressor

Two stage compression (air cooling) permanent magnet series

Two stage compression permanent magnet screw compressor

Displacement:0.67-74m³/minMotor power:22-355KW

Large rotor and low speed design are adopted

Ie3 energy efficiency, high efficiency and energy saving

Industry top brand frequency converter

Adopt large amount of aluminum fin cooler

Product Overview
Configuration Advantages
  • Aluminum fin cooler

    A large amount of aluminum fin cooler is used to ensure good cooling effect when the ambient temperature is 45 ℃
  • High efficiency and energy saving

    Ie3 energy efficiency, high efficiency and energy saving. IP54 protection grade, more suitable for various working conditions and environments. High grade 38uh permanent magnet rare earth material is adopted to effectively prevent high temperature demagnetization. Constant pressure gas supply, excellent energy saving
  • Brand frequency converter

    The inverter of the industry's top brand is selected, which is stable, intelligent and efficient. Stepless speed regulation can be carried out. Through the PID regulator inside the frequency converter, it can realize smooth start and adapt to any working condition with large gas fluctuation
  • Large rotor

    The main engine adopts large rotor and low speed design, including two independent compression units. The first stage compression rotor and the second stage compression rotor are combined in one casing. Each stage has small compression ratio, less leakage and high volumetric efficiency. Under the same power, the load is borne by two heads, with small bearing force and longer service life. Year on year single-stage compression energy saving 15%